How To Start a Toshiba Laptop in Safe Mode?

All the laptops and especially Toshiba laptops come with two modes in Windows: Normal Mode and Safe Mode. You can start a Toshiba laptop in safe mode when you need to troubleshoot a system problem, or when you need to remove a third-party application that’s preventing the computer from starting normally.

But the question is, how to start a Toshiba laptop in a safe mode when you need to start it in this way? The thing is, safe Mode halts all open programs and processes, so it allows you to start your computer in a clean environment without any other software running.

If you are worried about whether you should take a backup of your data before proceeding with the Safe Mode, then remember, you do not need to take backup when your computer is running in Safe Mode.

Safe Mode is for blocking viruses in your system; in fact, in Safe Mode, your PC is in a state when it is not vulnerable to viruses. Backup in safe Mode is not required because when you boot in Safe Mode, your PC will not process any file on your computer.

However, unless we are onto the query to start your Toshiba laptop in safe mode, let’s do it by following some simple steps given below.

Read Also: Best Laptop for Dragon Naturally Speaking

What is the safe mode in a Toshiba Laptop?

Safe Mode is a diagnostic mode of Windows. It can be helpful to troubleshoot a computer problem. Sometimes a Windows Operating System will not boot properly, and Safe Mode can help you start the computer with a minimum amount of driver and software loads.

In Safe Mode, Windows starts with a minimum amount of memory, the files that are normally loaded at startup are not started, and most services are not available. Windows will automatically restart your computer after two minutes if no key is pressed.

Why do we use safe mode in a Toshiba Laptop?

Toshiba computer manufacturers use this form of safe Mode with Windows to recover your program or if you cannot boot your laptop or desktop PC.

One can either boot normally or put the computer in Safe Mode to diagnose any issues or errors. Safe Mode is a diagnostic or troubleshooting mode which helps fix problems arising in the Normal Mode.

It is a stripped-down version of the Windows operating system. You can run a few basic diagnostics and troubleshooting tools to fix problems that you may face while using your laptop.

How exactly to start a Toshiba laptop in safe mode?

The process doesn’t depend on what model of Toshiba laptop or any other laptop you are using. But it depends on what operating system you have on your laptop. Well, in a general procedure, we do the following things to start a Toshiba laptop in safe mode.

Step 1: Restart your Toshiba Laptop:

First things first, start your laptop in case it is turned off, or restart it if it is already on. Only through this, you can go for the safe mode of your Toshiba laptop.

Step 2: Press the F8 key:

Between the process of your laptop coming back to life, keep pressing the F8 function key after seconds. When it will detect it, you will have a new window appearing before you.

Step 3: Advanced Option Menu:

Stop pressing the key when you see an Advanced Options menu on the front screen. Now, use the cursor to go Up and down for selecting the Safe mode.

Step 4: Select the Safe Mode:

Once you reach the Safe Mode, click on it and your pc will start opening in the safe mode. However, in case you want the internet in Safe mode, select Safe mode with the network option.

Step 5: Click enter:

Click Enter and you are good to go with the Safe Mode of your Toshiba Laptop.

So, you are aware of how to start a Toshiba laptop in a safe mode. Just follow the steps given above and it’s too easy.

Frequently Asked Questions

What if Toshiba Satellite F8 is not working?

Good question, unfortunately, in most cases like this, the hard drive has failed. Often, the hard drive has failed and has to be replaced to get the Toshiba Satellite F8 working again.

Moreover, the first thing we would try is to remove the battery and press the power button for 15 seconds. If the laptop still does not work then unscrew all the screws at the back of the laptop and remove the hard disk. If the laptop still does not turn on then we would recommend replacing the hard disk.

How to open Toshiba Satellite Safe Mode Windows 7?

If you are using Windows 7 or Vista operating system, press the Windows logo key and R at the same time to open the Run box. When the box appears type msconfig and press enter. This will open the System Configuration Utility. Click on the Boot tab and uncheck the Safe Boot box. Click on OK and then on Restart.

How to open BIOS on a Toshiba satellite laptop?

If you’ve forgotten the password to open the BIOS on your Toshiba Satellite laptop, it’s not necessary to send it in for servicing. This is somewhat of a long process, but it is an option for you. I’ll explain how it’s done step by step.

  1. First, turn off the computer. Then, disconnect all the cables, except for the power cord.
  2. Next, press the power button. At this point, you should see a Toshiba or “Press ESC display boot options” type message. Press the ESC key, and while pressing it, turn on the computer. The computer should display “Press ESC to display boot options.
  3. ” This time, press the “F12” key. Let go of the ESC key. The computer will attempt to load the OS. When it reaches the OS boot screen, hold the “F8” key. While holding this key, press the “c” key. The computer will say “Entering Setup.” Press the “F10” key.

If all of the above is done correctly, the computer will display the “Main” screen of the BIOS. From there, you can set the boot order to the hard drive first, if the OS won’t load.

You can also use the arrow keys to navigate to the “Save & Exit” screen and choose one of the three options. The computer will check the OS files before exiting,

Besides this, you can also easily access BIOS on your Toshiba laptop by pressing the F2 key right after powering up the computer. The first screen that will pop up will be the BIOS setup screen. You will see a variety of options like:

  • A: System Configuration
  • B: System Performance
  • C: System Boot D: Security
  • E: Boot Order
  • F: Exit Setup

Just use the arrow keys to navigate and the Enter key to make your selection. Once you are done making your changes, press the F10 key to save and exit the BIOS setup.

Read Also: How to Convert HDMI Output to Input on a Laptop

How to start Toshiba Satellite Safe Mode in Windows 8?

To start Toshiba Satellite Safe Mode in Windows 8, you have to complete the following procedure:

Step 1: Press Windows + C to open Charm Bar

Step 2: Click Settings

Step 3: Click Change PC settings

Step 4: Click General

Step 5: Click Advanced startup

Step 6: Click Restart now

Step 7: Click Troubleshoot

Step 8: Click Advanced Options

Step 9: Click Startup Settings

Step 10: Click Restart

You would normally stop Safe Mode on Toshiba Satellite by using the same advanced option, but it might be pretty boring to restart your computer each time you want to enable or disable Safe Mode.

Fortunately, if you need to modify this setting frequently, you can create a shortcut on your desktop and then use it to start and stop Toshiba Satellite Safe Mode.

What if Toshiba Satellite Safe Mode is not working?

There are many reasons why Toshiba Satellite Safe Mode is not working. But the most common reason is the improper installation of the operating system.

You should ensure that you are using the original version of your operating system. You would also need to check the date of the installation of your system.

Has it been installed on the correct date, with the correct version of the Windows Operating System? If it hasn’t been installed on the correct date, then the operating system will not be activated.

How to reset the BIOS of a Toshiba Laptop?

Whenever you are experiencing hardware-related problems, two common solutions are possible. First, you can try to upgrade the drivers, operating system, power settings, virus control settings, etc. If that doesn’t work, you can try resetting the BIOS. Here’s how you can do it.

Step 1: Remove the CD/DVD drive.

Step 2: Use your keyboard to press the F1 key, F2 key, F8 key, F10 key and delete key simultaneously.

Step 3: Then, press the delete key again to confirm BIOS reset.

Your BIOS is now reset, but you need to reset your date, time, hard drive, and network settings.

What is the boot key for a Toshiba Laptop?

Use the function key F2 to enter the BIOS setup. You will be prompted to verify that you really want to enter BIOS by pressing the F1 key. If you are using Windows, you will need to press F2 to enter the BIOS setup.

The BIOS will display the BIOS information. Use the arrow keys on the keyboard of the laptop to navigate the menu. You can also use the cursor keys to navigate. You can also use the Enter key on the keyboard of the laptop to select an option.

How to open a Toshiba laptop in safe mode on Windows 10?

  • Open Start and in the Search Box, type msconfig.
  • Then press Enter. This will open the System Configuration Tool. Select the Boot tab. Under Boot options, select Safe Mode.
  • Then click OK. Restart Windows 10. Press the power button and when the power options menu is displayed, select Safe Mode.

When you restart in Safe Mode, Windows 10 is loaded in a way that doesn’t load any third-party drivers and is a lot more stable for diagnosing problems.

Final Words

I hope that after reading the information given here, you are completely aware of How to start a Toshiba laptop in safe mode and a lot more other queries.

The process is very simple and easy to follow as all you will have to do is press the right keys at the right time. Moreover, we are glad to know that you can perform this operation on different operating systems such as Windows 10, 8, and 7.

Well, this was all for today. Stay tuned for more latest updates and answers to frequently asked queries. Thanks for reading and have a great day!

Leave a Comment