How to remove the battery from Acer laptop? There are many who want to know the answer in order to remove the Acer battery because the laptop does not work and they want to change it.
One of the most common problems with Acer laptops is the battery itself. If you have an old Acer laptop, it may be prudent to change the battery if it doesn’t hold a charge anymore.
The important point when removing them is to keep them in order so you can later put them back together correctly.
Removing the Acer battery perhaps might not be an easy task, if you do not know what you are doing. This is why we tried to approach the subject as simply as possible so that any potential reader can follow our easy-to-understand guide.
In this article, we are going to show you the whole procedure to succeed in your intent and remove the Acer laptop battery.
Acer Laptop Battery Replacement – Step By Step Guide
To change or replace the battery, you must follow these steps step by step. Remember to pay attention because sometimes it is easy to make mistakes.
Step 1 – Shut down Acer Aspire One laptop
First of all, you have to shut down your Acer Aspire One laptop properly before starting any procedure related to its components. Usually, an Acer Aspire One laptop is powered on and off with a single switch.
When the batteries are already drained, you must turn off your laptop. You can do this by disconnecting it from the main power supply.
To shut down Acer Aspire One, all you have to do is to press the power button for several seconds until the laptop completely shuts down.
Step 2 – Prepare a flat surface
Place your Acer Aspire One on a flat surface so that the battery can be removed comfortably.
Step 3 – Remove the battery cover
Remove the Acer laptop battery cover using a screwdriver. The type of screwdriver you use must be appropriate for your computer’s screws. If you don’t know which one to use, take your time and select the right size that fits well with your laptop’s screws.
As stated before, if you use the wrong screwdriver, you may end up damaging your laptop.
Once you have removed the back cover, take your time to analyze your Acer battery condition without haste. If it is in bad shape, empty, and with visible signs of deterioration, just go ahead and replace it with a new one. However, if it does not present any of these conditions, restoring its use is still possible.
Step 4 – Remove Acer laptop battery
Remove the old Acer Aspire One laptop battery by pulling it gently from its slot. You may also use your finger to unclip it from the base of the laptop if you want.
Step 5 – Insert the new battery
Insert the new battery in its slot once you have finished with the old Acer Aspire One battery. Make sure you have it seated properly because there should not be any gap between your laptop’s base and batteries.
Step 6 – Reassemble Acer laptop
Replace the Acer laptop battery cover by inserting its key into the corresponding slot. Then, push the cover slightly downward. The slot’s key should fit well so it will not require too much force to lock it back in place.
That is all you have to do to remove an Acer Aspire One battery properly.
FAQS—How to Remove the Battery from Acer Laptop
Why is my Acer laptop battery not charging?
There are several reasons that can cause this behavior. First, check if the power cable is connected to the laptop correctly. If it doesn’t work, try checking if your adapter is working or not by plugging it into another device.
Additionally, you should also check if the Acer battery has any damage because this could be causing it to not charge.
If it doesn’t have any visible signs of being damaged, you should consider replacing it with a new one to see if the problem persists.
How long does an Acer laptop battery usually last?
This depends on how often and how hard you use your computer. However, most Acer laptop batteries tend to deteriorate quickly if they are used daily and left on for several hours.
How can I prolong my Acer laptop battery life?
First, try to avoid leaving the battery drained. If you do not plan on using your laptop for more than one hour, make sure to plug it in and turn it off while charging.
Moreover, you should also turn off the hardware components that are not necessary for the operation of your computer, such as the wireless connections.
Can I replace Acer’s laptop battery myself?
If you know how to disassemble your Acer laptop correctly, then yes. Otherwise, it would be best if you seek help from a professional technician to do the job for you.
How do I know if my Acer laptop needs a new battery?
Generally, a laptop battery that is dead or deteriorated will not hold any charge. If you notice that your Acer laptop’s battery does not last more than one hour even with a full charge, it is probably time for you to get a replacement.
Do I have to discharge my Acer laptop battery before recharging?
No, unlike nickel-based batteries you don’t have to discharge your Acer laptop battery before recharging.
It is a good idea to change your Acer laptop battery when it is no longer functional or even if you want a new one. If your current battery is not in good condition, it does not hold a charge anymore, and can’t keep the computer running for long periods, consider replacing it with another brand new battery.
That’s all you need to do to remove the Acer Aspire One battery. It might not be easy, but if you take your time, it is possible. If that was too complicated for you, there are always other alternatives like using a laptop that does not contain a battery or removing the Acer Aspire One motherboard.