How to Put a Key Back on a Dell Laptop |Complete Guide

There’s nothing more frustrating than having a key fall off your laptop. Something about it just feels wrong. If you find yourself in this situation and are wondering how to reattach the key to your Dell laptop, there are actually several ways you can do it. Here is one of the best methods that have proven successful for many others before you. 

A Guide to Dell Laptop Keys Replacement

Replacing a key on a Dell laptop is an easy and straightforward process. We will now show you the steps on how to do it.

Step 1: Assemble your repair tools

It is important to have the right tools when it comes to key replacement in Dell laptops. In this case, we will be using a Phillips screwdriver, a flathead screwdriver, a pair of scissors, a knife, a spudger, a q-tip, some toothpicks, and a pair of tweezers. These are the essential repair tools you will need when replacing a key. You should always keep these in your repair toolkit for when you need them.

Step 2: Know the key’s anatomy 

It is important to know the anatomy of the key that needs to be replaced. This is especially important when it comes to Dell laptop keys replacement because there are different types of keys.  

The most important parts of a keyboard are the keycap, the key carriage, and the keypad. The keycap is the top part of the key that you press down on when you’re typing. It’s what you actually touch when you’re using the keyboard.

The key carriage is the plastic or rubber part that you actually press down on to make the letter appear on your screen. It is what holds all the keycaps in place and allows your fingers to press each of them in turn and the keypad is the part of the keyboard that connects all the keys together.

Step 3: Find an unstained workplace

You will need a clean and dry place to work on your laptop. If you have any doubts about this step, take the laptop to a clean, dry place where it can be undisturbed before you start to work on it. Also, try to find somewhere that has good lighting. You will need the right light to be able to see what you’re doing and get better visibility.

Step 4: Turn off and unplug your laptop

Once you have found the right place, you should turn off your laptop. You will then need to unplug it from the wall or the power source. This is important because you don’t want the laptop to run down its battery or damage other stuff.

Step 5: Wipe the key surrounding area

Before you start working on the key itself, you should wipe off any dust or dirt that might be on it by using a damp cloth. You will need to clean the key surrounding area with a Q-tip soaked in alcohol. This is very important in order to avoid any contaminants. 

The aim of this is to make sure that there’s no dirt or grime on it. It will be much easier to replace or put it back if you perform this step.

Step 6: Clean the grooves beneath the key

Now that you have cleaned the key surrounding area, you will need to clean the grooves under the key. The main objective of this step is to remove any dust or dirt that might be lodged in there. If you try to clean the grooves with a Q-tip, you will only end up removing the dust that is stuck there. You will need to use a moist cloth which will help much more.

Step 7: Detach the key

Next, you will need to use a pair of tweezers to pull out the key. Use the tip of the tweezers to slide underneath the key, and then pull it out. It is important that you don’t twist the key.

Step 8: Evaluate the carriage for bent or out-of-place parts

You should now be able to evaluate the key carriage. If you can see any bent or out-of-place parts, you should check them out with a pair of scissors. You must make sure that there are no bent or damaged parts.   

Once you have examined the key carriage, you will need to use a flathead screwdriver to separate the keypad from the key carriage. Use the tip of the screwdriver to pry it apart. You will need to keep pressure on it so that it doesn’t pop off.

Step 9: Withdraw the key’s internal parts

The next step is to remove the key’s internal parts. To do this, you will need to use a flathead screwdriver again and try to pry it apart from the bottom of the key. Be careful not to damage the keypad. Once the keypad is removed, you will be able to use the tweezers to withdraw it from the key carriage.

Step 10: Search and take off any obstructions

Now that you have pulled out the internal parts of the key, you will need to use your hands to examine and look for any obstructions. If you find anything that looks like it might be a problem, such as a broken wire or anything else, you should remove it. This will help you to clean the key more easily. 

Step 11: Re-insert the key’s carriage and pad

After looking over the keypad to see if there’s anything in there, you will need to re-insert it into the key carriage and then need to attach the keypad back onto the key carriage. Use the tip of the tweezers to insert the keypad into the key carriage. Once it’s in place, you will need to secure it with two screws.

Step 12: Place the key back in its slot

Now that you have finished examining and fixing the key, you will need to put it back in its slot. Once you have done this, you must press the key into the keyhole until you hear the click sound. 

Step 13: Press down on the key firmly 

The final step is to press down on the key firmly. This is very important because if you don’t do this, you may end up causing damage to your key. You should only be pressing on the key for a few seconds and finally, it’s time to check the key’s functionality.

Conclusion

Mentioned above are a series of steps that one must follow to put a key back on his or her Dell laptop. After doing quality research we have gathered all this information that will surely assist you if you ever face this problem.

So, what are your thoughts on this article? Kindly provide your feedback in the comments section below and give it a thumbs up if you liked it. Also, share it with your friends and family members. Thank you all in advance.

Leave a Comment