How to connect laptop hard drive to desktop via USB and motherboard? You may ask this question because you find it difficult to connect them easily. If you want to make cloud storage for your desktop computer, you can easily use your old laptop hard drive.
Using a laptop hard drive is like you are expanding the data storage for your desktop computer by connecting it through USB and motherboard medium.
Hard drive refers to the device that stores all your important data including your personal and professional archives.
The difference between the desktop configuration and laptops is the desktop that has a fixed motherboard with fixed physical components. But the laptop includes a removable motherboard (hard drive) which can be reused in any laptop computer with lots of ease.
I am writing this article in concern with how to connect your laptop hard drive to the desktop via USB and Motherboard. There will be an extra method that you can use when you do not have the equipment.
How to Connect Laptop Hard Drive To Desktop Via USB And Motherboard – Step by Step Guide
Here are the steps to connect your old laptop hard drive to the desktop via USB and motherboard.
These are the things you need for this process:
1. Desktop computer – Please make sure it is switched off before you begin to connect internal hardware devices.
3. Laptop Hard Drive
4. USB Cable 5 Motherboard Cable Connector
Take out the desktop computer’s power cable. Also, make sure that you remove all external devices such as monitors and keyboards. Remove the cover (if the case is not opened then this process might be different but usually you can open it using one or two screws). At this point, now your computer looks like an empty shell.
Now, you need to identify the wires of the motherboard and USB connector. Motherboard wire is a little bit thinner than USB wire so it will be easier for you to recognize them.
At this point, take note of the blue color used in all USB wires. This means that it belongs to Computer A/B (A is the male end and B is the female end). If you find any other color such as green, black, white, etc., it belongs to external devices.
Identify a small area on your motherboard where you have to attach a USB wire with a motherboard wire. Usually, it will be near a CPU fan or graphics card. Usually, the blue wire is used in the USB cable and black or brown wires in the motherboard cable.
Once you have done with the identification process of both cables, cut them to a suitable length. Now strip off approximately 3mm of insulation from each cable.
If needed peel the white insulation layer from inside the USB cable carefully with a sharp blade. This process is to expose the tiny wires inside it. (If you find it difficult, you can skip this step and cut the wires off to the appropriate length. This will not be a problem).
Once both of the cables are exposed, twist the brown motherboard wire with the black or green USB wire and vice versa. Make sure that you tighten them up well so that it does not fall off when you join both of the wires. It is better if you have some insulation tape or heat shrink tubing to cover them up before joining them together.
This process might be different depending upon the size and location of the USB cable connector on the laptop hard drive. Usually, there will be four holes and you need to strip off approximately 3mm of insulation from each wire of the USB cable connector.
Once done, place them in the corresponding holes and tighten them down with a screwdriver. Now join both ends of the motherboard cable (A end with B end) and secure it with a screw. Plugin the power cable and switch on your desktop computer.
It will take a couple of minutes for your hard drive to boot up correctly. You can check whether it is working or not by going to the My Computer section from Control Panel.
Finally, you have connected your old laptop hard drive to the desktop via USB and motherboard. If you are finding it difficult, please take your computer to a professional to avoid any damage.
How To Connect Laptop Hard Drive To Desktop Without Adapter?
Here, in this article, we have explained how to connect a laptop hard drive to the desktop without using an adapter.
In some cases, you may find your old laptop’s hard drive dead and desperately searching for data from it. In such a case, you can try connecting it to a desktop computer via USB cable and motherboard connection.
Moreover, you do not require any adapter for this process. You can simply connect your laptop hard drive to the desktop using a motherboard cable.
Make sure that you remove all external devices such as monitors and keyboards. Remove the cover (if the case is not opened then this process might be different but usually you can open it using one or two screws).
Now detach the hard drive from the laptop and power your desktop computer. Remove all internal components such as graphics cards, RAM sticks, etc. before you start this process.
Identify a suitable place inside your desktop where you have to attach the connector of the old hard drive with motherboard wire. In case of a broken connector, please make sure that you purchase a connector of the same type (IDE or SATA).
Once both wires are exposed, attach them to the motherboard cable and tighten it up with a screwdriver. Now join both ends of the main power cable and plug in the power supply. Switch on your desktop and go to BIOS settings to check whether your hard drive is reading.
Now you have successfully connected the old laptop hard drive to a desktop computer without using any adapter.
Read Also: Best Laptop for Automotive Technicians
How to connect a laptop hard drive to desktop via USB?
With the emergence of USB devices, connecting a hard drive via USB has become a lot easier. In this tutorial, we will be seeing how you can connect your laptop hard disk to a desktop computer via USB cable to transfer data from one device to another.
The first step would be to attach the USB cable’s A connector to your desktop and B to your laptop. Note that, if you connect it opposite it will not work and you might risk damaging both machines.
Once you have tried out all possible locations on your laptop’s USB ports and found a connection, leave the USB connected.
Now, open My Computer on the desktop and then left-click on your hard drive. You should be able to see a view of all files and folders that are present inside it.
Now you can view, copy and transfer files from laptop to desktop without using any software.
If there is a connection problem or you are unable to access your hard disk from the USB port system, check out if it’s an issue with the USB driver or any other driver installed on your desktop computer.
If it does not solve the problem, try restarting both devices to clear all possible bugs.
Frequently Asked Questions
1. Can I connect my laptop SATA hard drive to the desktop?
You can connect SATA hard drive to a desktop PC. You do not require any special adapter for this purpose. However, try checking if it is reading on the computer you are using.
2. I am unable to access my Laptop HDD from a USB port system?
It might be an issue with the USB driver installed on your computer or some other driver. Try restarting both devices and check if it resolves the issue for you.
3. Can I connect an external Hard drive to my laptop through USB?
A connector is used to attach the hard drive to a desktop computer that uses IDE or SATA interface. You can also use it to connect an external hard disk to your laptop.
4. Is it safe to use a laptop HDD on a desktop?
If you want to use your laptop hard disk on a desktop then the first thing that you need to do is attach it using a USB. Once attached, you can access it like how you would for any external hard drive. It will not harm your computer if there are no viruses inside.
5. Can I transfer files from Desktop Hard drive to Laptop?
There are multiple ways to transfer files from the Desktop to the laptop. You can use an external hard drive or physical disc or go online using cloud storage. If you want to do it through USB, attach the disk to your laptop and drag and drop files according to your convenience.
6. Can I copy files from my laptop hard drive onto my desktop?
Yes, you can copy files from your laptop hard drive to your desktop. There are multiple ways of doing it. You can use an external hard drive, CD/DVD, or online storage. The process of transferring files from laptop to desktop by USB is as easy as copying and pasting on your personal computer.
Please note that you should not plug anything inside your hard drive while it is connected to the desktop computer. There are chances of crashing data if you do so. Instead, connect the cables and then power off both devices.
Connecting a laptop hard drive without an adapter can be risky due to some reason. Please be careful while doing it otherwise, you may end up losing data. If you want to avoid such a problem and don’t want to spend so much money on buying a hard drive adapter, then USB is the best option.